
)*+,,*
-./
!
))0+)01++,
=!
)(+
42!
+)0
STLF-NA-TRD-REQ-4450 SatLife system shall use the transport stream Id contained in the SDT, EIT
and RST to identify the downlink destination and select the route to transmit
these tables only to this downlink. The BAT and the CAT will use a broadcast
route to all TDMs.
T AAS-F : The RST is broadcasted; see
"NCC Features Description" document
issue 6, section 2.3
AAS-F - NCC_STL_DVB_CAT_020
AAS-F - NCC_STL_DVB_SDT_020
AAS-F - NCC_STL_DVB_BAT_020
AAS-F - NCC_STL_DVB_EIT_020
AAS-F - NCC_STL_DVB_RST_010
-
STLF-NA-TRD-REQ-4460 SatLife system shall not transmit a subtable from a VSP that is not logged on
in the system.
T AAS-F : A not logged SP RCST has no
timeslots to send tables
AAS-F - NCC_STL_DVB_CAT_030
AAS-F - NCC_STL_DVB_SDT_030
-
STLF-NA-TRD-REQ-4465
(OPT)
SatLife system shall offer the possibility of adding extra information no
coming from the VSPs on these tables by provisionning or management.
OPT - -
STLF-NA-TRD-REQ-4470 SatLife system shall handle the following category 4 tables: PMT. T AAS-F :The NCC builds and sends only
the FLS PMT and the RCS PMT (in the
same way as in the AmerHis system); all
other PMT are transmitted by the SP
RCSTs and are not see by the NCC .
-
STLF-NA-TRD-REQ-4480 The PIDs used for the transmission of the PMTs shall be configurable in the
Service Provider and in the MS.
T AAS-F : VSP Traffic PID are configured
in XML configuration file and read by the
NCC at start up.
AAS-F - NCC_STL_SESSION_010
AAS-F -
NCC_STL_MULTICAST_PID_030
-
STLF-NA-TRD-REQ-4490 SatLife system shall transmit the tables of category 4 to the beams at the rate
indicated next:
- Table: PMT
- Category: 4
- Type: PSI
- Max Number: 1 per program
- Destination D/L TDM: Relevant D/L where video is broadcast
- Insertion Period (max): 0,5 seconds
A AAS-F :The NCC builds and sends only
the FLS PMT and the RCS PMT (in the
same way as in the AmerHis system); all
other PMT are transmitted by the SP
RCSTs and are not see by the NCC .
-
STLF-NA-TRD-REQ-4500 The System shall inform the operator if the number of PMTs causes the PAT
to exceed the maximum size.
A - -
STLF-NA-TRD-REQ-4510 The PMT shall reference the right stream type corresponding to the codec
used for the transmission of the video: MPEG2, H.264, MPEG4 or WM9.
T SP_TABLES_PERIODS
STLF_IF_DTV_SPRCST_SP_INTG4
-
Komentáře k této Příručce